Toggle Switches

Showing all 2 results

  • 1287-I Double Throw Switch

    Click Here For Cut Sheet

    DOUBLE THROW SWITCH IS A CENTER-OFF,  MAINTAINED SWITCH HEAVY DUTY SHP RATING = 2-HP 120/VOLT  2-HP 240/VOLT   MAX AMPERAGE = 24 AM

    1287-I DOUBLE THROW SWITCH-  LEVITON- 30AMP -125/277 VOLT =SINGLE POLE -DOUBLE THROW -CENTER-OFF- MAINTAINED- HEAVY DUTY SWITCH

    AC Horsepower Rating:
    HP Rating: 2HP-120V 2HP-240V-277V
    Max Amperage: 24 Amp
    Electrical Specifications
    Amperage: 30 A
    Dielectric Voltage: Withstands 1500V for 1 minute
    Endurance: 50,000 cycles minimum
    Grounding: Self-Grounding
    Overload UL20 Test 100 cycles of OL at 4.8 times rated current
    Temperature Rise: Maximum 30 degrees C rise
    Voltage: 120/277 VAC
    Environmental Specifications
    Flammability: Rated V-2 per UL 94
    Operating Temperature: -40°C to 65°C
    Material Specifications
    Base Material:

     

    Thermoplastic
    Color: Ivory
    Contact Material: Silver-Alloy
    Cover Material: Thermoplastic
    Strap Material: Steel
    Terminal Screws: Brass 8-32
    Toggle: Polycarbonate
    Mechanical Specifications
    Product ID: Ratings are permanently marked on device.
    Terminal Accom. : 14-#10 AWG back wired; #14-#12 AWG side wired
    Termination: Back or Side Wire
    Torque Range: 12-14 in pounds
    Product Features
    Device Type: Toggle Switch
    Feature Maintained Contact CTR OFF
    Function Single-Pole Double-Throw
    Grade Extra Heavy-Duty Industrial Specification Grade
    Standards and Certifications
    ANSI: C-73
    NEMA: WD-1 & WD-6
    NOM: 057
    UL Fed Spec WS896E: File #E7458
    UL Standard: UL 20
    Warranty: 10-Year Limited
    Quick View
  • MS402 40A DOUBLE POLE SINGLE THROW MOTOR CONTROLLER

    Click Here For Cut Sheet

    Description:

    40 Amp, 600 Volt, Double-Pole, Single Phase AC Manual Motor Controller, Suitable as
    Motor Disconnect, Toggle, Industrial Grade, Non-Grounding, Back & Side Wiring, –
    Black.

    Powerswitch® Industrial Grade AC Manual Motor Controllers provide safe, reliable
    control of a variety of motor loads. Typical applications include manual ON/OFF
    switching control of conveyor systems, pumping machines, HVAC systems, air
    compressors and other heavy manufacturing equipment. These motor controllers are
    available for both single-phase and three-phase applications.

    Technical Information:

    Electrical Specifications
    Amperage: 40 A
    Dielectric Voltage: Withstands 2200V for 1 min.
    Endurance: 6,000 cycles inductive motor type load
    Grounding: Non-Grounding
    Pole: 2
    Temperature Rise: 50ºC Max at full rated current
    Voltage: 600 VAC
    Environmental Specifications
    Flammability: Rated V-0 per UL 94
    Operating Temperature: -40°C to 60°C
    Material Specifications
    Base Material:

     

    Thermoplastic Polyester
    Color: Black
    Contacts: Silver-Cadmium .031 Thick
    Face Material: Thermoplastic Polyester
    Strap Material: Nickel Plated Brass
    Terminal Screws: Nickel-Plated Brass 10-32
    Toggle: Thermoplastic Polyester
    Yoke: Nickel-Plated Brass
    Mechanical Specifications
    Product ID: Ratings are permanently marked on device.
    Terminal Accom. : #10-#8 AWG
    Terminal ID: T1, T2, L1, & L2 marked on back of device.
    Termination: Back & Side
    Torque Range: 25-inch pounds maximum
    Product Features
    Color: Black
    Device Type: Toggle Switch
    Standards and Certifications
    ANSI: C-73
    NEMA: WD-1 & WD-6
    NOM: NOM-ANCE
    UL 60947-4-1: supersedes UL 508

     

    Warranty: 10-Year Limited
    cUL per CSA C22.2 No.111: File #E63969

     

    Quick View
X